- OVERVIEW AND WHY SHOULD YOU ATTEND
- AREAS COVERED AND LEARNING OBJECTIVES
- WHO WILL BENEFIT
Lyophilization, commonly referred to as freeze drying equipment, is the process of removing water from a product by sublimation and desorbtion. This process is performed in lyophilization equipment which consists of a drying chamber with temperature controlled shelves, a condenser to trap water removed from the product, a cooling system to supply refrigerant to the shelves and condenser, and a vacuum system to reduce the pressure in the chamber and condenser to facilitate the drying process. Lyophilizers can be supplied in a wide variety of sizes and configurations and can be equipped with options that allow system controls to range from fully manual to completely automated.
why should you attend
The fundamental principles and technology are coupled with practical aspects of lyophilization in the training program. Principles and concepts presented are later used to discuss real world practical applications. The long term training sessions include participants in development, operations, engineering, technical services, quality, validation, and regulatory affairs. Brief on-line training addresses critical aspects of freeze drying to ensure compliance, validation and minimization of patient risk based on the development of the product proven to have been during the clinical trials before the product was transferred into commercial scale operations.Click to View the Pricing Plan
- Essentially a brief discussion about each of the Critical Aspects and related affects of Variables
- Lyophilization 101 – Comprehension on each step of the Freeze Drying/Lyophilization Process
- Understanding why various steps of the process become more advantageous and cost effective
- Sublimation Rate Variability
- Heat Transfer
- Loss of Protein Activity
- Freezing Affects on Primary Drying
- Optimization of Primary Drying and Proof of the effectiveness of Secondary Drying
- Effects of Freezing Method and Excipients on Protein Surface
- Influence of Packing Density and the container selection
- Residual Moisture Regulatory Considerations by the FDA
Lyophilization process consist of three phases: Freezing, primary drying, and secondary drying. Conditions in the dryer are varied through the cycle to ensure that the resulting product has the desired physical and chemical properties and that the required stability and sterility is achieved and maintained.
During the freezing phase, the goal is to freeze the mobile water of the product. Significant supercooling may be encountered, so the product temperature may have to be much lower that the actual freezing point of the solution before freezing occurs. Generating very large frozen particles due to the initial freezing process can cause the sedimentation rate to go way up causing a much longer cycle than effective design of the process can accomplish making the process more cost effective and higher quality.
WHO WILL BENEFIT
- Professional Beginners
- Professional Intermediates
- Advanced Development Professionals
- Regulatory Professionals
- Validation Professionals
Jerry Dalfors has extensive (40+ years) of business administration, consultative, technical and managerial experience in the development and manufacture of highly regulated biopharmaceutical products including injectables, biologics, medical devices and oral dosages. He has held permanent employee, temporary employee and company representative management positions with a multitude of the major pharmaceutical and biotechnology companies in the US.
He has worked with or assisted more than two dozen companies with the establishment of controlled document/quality systems, FDA briefing and submittal documents, project management of several multimillion dollar projects including design, start-up and validation to assure fast track FDA approval by maintaining strict regulatory compliance during all phases of engineering, construction, commissioning and validation, and has written numerous submission documents for product, process and facility approval/licensing which also required the development of quality systems which included customer complaint management, deviation management, CAPA and associated site wide employee training.
Each of his projects have been received and accepted by the FDA and other regulatory agencies. Jerry is considered an expert in most all aspects of the biopharmaceutical and medical device industry and has trained many FDA field inspectors on a variety of topics. None of his work has ever received a 483 but has corrected and prevented many along with Warning Letter remediationView all trainings by this speaker
Moving from an Operational Manager to a Strategic Leader
Speaker: Chris DeVanyTime: 01:00 PM EDT | 10:00 AM PDT
Location: New York
Logistics Channel Incoterms Standards
Speaker: Dr. Rossano V. GeraldTime: 01:00 PM EDT | 10:00 AM PDT
Location: New York
Thank you for the spreadsheet webinar. The webinar was informative and helpful. Although many of the concepts are known and understood by Industrial and Process Engineers, it is always helpful to have a straightforward review. The spreadsheet will be beneficial in being able to help identify areas of risk and areas that may require some attention.
Benchmark Electronics , ******** Engineer
This was a very informative session, it did help my company by raising awareness in areas we lack policies. The only thing I would suggest get added to the session is direct information relating to Accounting, ex. Taxation rules for record retention as they are some records which a company is required to keep indefinitely.
First MCO, ***** Manager
Overall I found the video conference well organized and very informative. The presenter, Ronald Adler, was certainly extremely knowledgeable and presented the subject matter in a well organized, direct and succinct manner. Afford the attendee the ability to track and record paid attendance/activity without a lot of tracking and follow up in order to gather the necessary information required to record the CPEs earned and paid for.
Dynamic Marketing Systems, VP Finance & Human Resources
As this was our first experience, we did not know what to expect. I believe the webinar was informative and to the point, and explained to us the purpose of the I-9, and how the company can be affected by an audit. It really motivated us to review our files and bring them up to date.
Young Transportation, ****Coach****
I have participated in several webinars hosted by Compliance Global on various H&S topics. They are always precise, technologically-oriented, and easy to use and partake in to further my knowledge of current Health and Safety regulations and topics.